Search Results - medical+device

12 Results

Sort By:

Adaptive Cognitive Prosthetic

Adaptive Cognitive Prosthetic to Treat Neurological and Neuropsychiatric Disorders and Traumatic Brain Injuries Princeton Docket # 14-3031 A researcher in the Princeton Neuroscience Institute and the Department of Psychology at Princeton University is developing a novel treatment approach for neurological and neuropsychiatric disorders. These neural...

Published: 4/9/2025 | Inventor(s): Timothy Buschman

Keywords(s): big data, bioinformatics, CNS, medical device, neuroscience, research tool

Category(s): Medical Devices/Diagnostics, Computer Science and Information Technology

Stress-Based State of Health and Charge Measurement for Intercalation Batteries

Stress-Based State of Health and Charge Measurement for Intercalation BatteriesPrinceton Docket # 12-2792The determination of a battery’s state of charge (SOC) and state of health (SOH) are important for the power management system that relies on batteries as a power source, e.g., mobile phones, laptops, electric vehicles, grid level storage,...

Published: 4/2/2025 | Inventor(s): Craig Arnold, John Cannarella

Keywords(s): battery, computers/software, energy, medical device, solar cell

Category(s): Medical Devices/Diagnostics, Computer Science and Information Technology

Integrated CMOS On-Chip Fluorescence Bio-Sensor and Microscopy System

Integrated CMOS-based Single–chip Fluorescence Bio‐Sensor System Docket # 14-2990 Integrated, low‐cost and portable point‐of‐care diagnostic technology has the potential to bring transformative changes in healthcare by enabling early detection of diseases in a remote field setting, allowing timely and rapid treatment to the patient and facilitating...

Published: 11/12/2025 | Inventor(s): Lingyu Hong, Kaushik Sengupta

Keywords(s): biomarker/diagnostic, computers/software, medical device, semiconductor

Category(s): Medical Devices/Diagnostics, Computer Science and Information Technology

Noninvasive Mid-Infrared In Vivo Glucose Sensor

Noninvasive Mid-infrared in vivo Glucose Sensor Princeton Docket # 14-2945 Researchers in the Department of Electrical Engineering at Princeton University have developed a novel, noninvasive method to measure blood glucose levels. Development of this noninvasive in vivo glucose sensor may improve the quality of life for the more than 343 million...

Published: 11/12/2025 | Inventor(s): Sabbir Liakat, Claire Gmachl, Anna Michel

Keywords(s): biomarker/diagnostic, diabetes, laser, life science research tools, medical device

Category(s): Biotechnology/Pharmaceuticals, Medical Devices/Diagnostics, Mechanical/Electrical Engineering

Microfluidic Device for the Study and Treatment of Biofilm Formation in Environmental, Medical, or Industrial Devices

Methods and Microfluidic Device for the Study, Testing and Treatment of Biofilm Formation in Environmental, Medical, or Industrial Devices Docket # 13-2880Researchers at Princeton University have developed a microfluidic system and method to investigate biofilm morphologies under more realistic physical conditions which could be used to screen potential...

Published: 9/8/2022 | Inventor(s): Bonnie Bassler, Howard Stone, Martin Semmelhack, Knut Drescher, Yi Shen, Colleen O'loughlin, Laura Miller Conrad

Keywords(s): antibiotics, anti-infectives, Biotechnology/Pharmaceuticals, life science research tools, medical device

Category(s): Biotechnology/Pharmaceuticals, Medical Devices/Diagnostics

Microfluidic Platform for the Dynamic Regulation of Mechanical Forces on Embryonic Organs

Microfluidic Research Tool to regulate mechanical forces and properties in Branching Morphogenesis Princeton Docket # 13-2864-1 Researchers at Princeton University, Department of Chemical & Biological Engineering, have developed a microfluidic research tool to solve previously unanswered questions in the study of branching morphogenesis. Development...

Published: 3/30/2022 | Inventor(s): Jason Gleghorn, Celeste Nelson

Keywords(s): biomarker/diagnostic, medical device, research tool

Category(s): Biotechnology/Pharmaceuticals, Medical Devices/Diagnostics

MedMon: A Novel Device for Monitoring Medical Device Security

MedMon: A Novel Device for Monitoring Medical Device Security Princeton Docket # 12-2789-1 Rapid advances in personal healthcare systems based on implantable and wearable medical devices promise to greatly improve the quality of diagnosis and treatment for a range of medical conditions. However, the increasing programmability and wireless connectivity...

Published: 4/19/2026 | Inventor(s): Meng Zhang, Anand Raghunathan, Niraj Jha

Keywords(s): medical device, Opto-Electronics/ELE ENG

Category(s): Medical Devices/Diagnostics, Mechanical/Electrical Engineering

Piezoelectric Nanoribbons for Monitoring Cellular Deformation

Piezoelectric Nanoribbons for Monitoring Cellular Deformation Princeton Docket # 13-2836-1 Researchers at Princeton University have developed a new process to make high performance flexible piezoelectric devices using PbZrxTi1-xO3 (PZT) nanoribbons. These devices have outstanding biointerface features with cells and tissues. The devices can be employed...

Published: 3/30/2022 | Inventor(s): Michael McAlpine, Thanh Nguyen

Keywords(s): Imaging, life science research tools, medical device

Category(s): Medical Devices/Diagnostics, Biotechnology/Pharmaceuticals

Novel Design Modifications to Microfluidic Microscopes Enabling Full 3D Profiling

Princeton Dockets # 12-2746, 12-2747, & 12-2748 Researchers at Princeton University have developed novel modifications to microfluidic microscope (MFM) devices. These new features will allow full three-dimensional (3D) profiling of objects, while retaining the simplicity and high throughput of traditional MFMs. Microfluidic Microscopy...

Published: 2/27/2024 | Inventor(s): Jason Fleischer, Nicolas Pegard

Keywords(s): life science research tools, medical device, Opto-Electronics/ELE ENG

Category(s): Medical Devices/Diagnostics, Mechanical/Electrical Engineering

High-resolution and Low-Cost Flow Scanning Tomography for 3D Imaging

Princeton Docket # 12-2798 Tomography is a method for three-dimensional imaging by sectioning, through the use of penetrating waves. Modern variations of tomography involve gathering projection data from multiple directions and using a computer to numerically reconstruct the final image. Tomography has been widely applied for medical imaging,...

Published: 3/30/2022 | Inventor(s): Jason Fleischer, Nicolas Pegard

Keywords(s): Imaging, medical device, Opto-Electronics/ELE ENG

Category(s): Mechanical/Electrical Engineering

1 2